|
|
|
|
Ready to use | Internal cable comes pre-terminated to Neutrik Gold XLR's
This bundle is for 4 people
Includes m!ka System Pole XS, System Pole Desktop Mounting Kit, litt 50/22 Color Segment RED, litt 50 Base Controller and four m!ka Microphone Arms
Supports microphones weighing up to 2kg (4.5lbs)
Adjustable friction joints
Wiring concealed by tubes and joints
Sturdy tube construction
Made of durable, silk-mat anodized aluminum
Renowned German craftsmanship
Pro Audio LA's bundle
m!ka Microphone Arm TV aluminum Yellowtec's m!ka Microphone Arm TV is created for video application. It is developed to be used for TV, vlogs and radio stations who provide video streams of their studio environment. Thanks to the possibility to place the arm completely below the camera’s field of view, faces will be fully visible for your audience and for your interview partner. This makes the m!ka Mic Arm TV the perfect choice for anyone who is involved in TV, video channels, and visual radio.
By adjusting only a few knurled screws you can make sure Yellowtec’s m!ka Microphone Arm securely fastens your mic according to its weight, in any position you pull it to.
Be it a switch in seats or a recording setup which is used by different persons, the m!ka Mic Arm allows you to customize your mic’s position within seconds. Fully compatible with the whole m!ka Mounting System, you can take full advantage of the given variety of mounting options to tailor your setup to your individual needs.
m!ka System Pole XS 7.09" (18cm) aluminum m!ka MMS System Poles are developed to mount and arrange your m!ka equipment according to your individual needs. Especially created to be used with the m!ka Microphone Arm TV, MMS TV Arm System Poles provide you with an option to mount up to four TV Arms while allowing a full field of view. This makes MMS TV Arm System Poles the best choice for TV or visual radio setups.
Use the m!ka MMS System Pole in combination with different available support articles to mount it either to your desk, ceiling or table stand. In addition, the pole itself provides you with different options to hold your m!ka arms and extensions in multiple positions. Each MMS System Pole has four full-height grooves which are evenly distributed around it. Use them to attach up to four items at the same height of the pole. Mount m!ka Monitor Arms or use MMS Pole Adapters to fix m!ka Microphone Arms or m!ka Studiolights.
The number of items which can be mounted on top of each other is restricted by the height of the MMS System Pole, in this case 7.09” (18cm). An additional m!ka Microphone Arm, m!ka Studiolight or litt Signaling Device can be mounted on top of the m!ka Pole. There are various options to pick from when it comes to combining your choice of m!ka elements.
m!ka System Pole Desktop Mounting Kit The m!ka System Pole Desktop Mounting Kit consists of all the items you need to permanently fix a m!ka System Pole to your desk. Use it to achieve maximum carrying capacity due to two large washers which secure a durable fit of your m!ka System Pole.
One of the two washers will be visible on top, one will be hidden underneath your desk. As one of the washers is aluminum colored and one is black, you can adjust the color of the visible one according to your pole’s color.
litt 50/22 Color Segment RED aluminum The flat litt 50/22 RED Color Segment is characterized by a bright red colored CleanVision® lighting signal with 22mm height. Red is traditionally used for on air, do not enter, danger or alarm signaling and as a traffic light signal’s part.
Each litt Color Segment is equipped with four high-power LEDs. Their unique screen lens produces remarkably consistent radiance with a full 360° viewing angle. The litt Color Segment is maintenance-free and has an exceptional average lifetime of more than 50.000 hours.
Take advantage of the litt Color Segment's Twist’n’Click System for easy installation and use the Lighthouse® Software to easily set individual lighting patterns according to your needs.
litt 50 Base Controller aluminum The solid aluminum litt 50 Base Controller is the fundamental element of every litt Signaling Device. Each litt Base Controller serves as an intelligent control center of signaling. Capable of up to five differently programmed litt Color Segments and a litt Sound Segment to be placed on top, it allows you to mix segments of different colors and sizes according to your personal preferences.
When creating your individual litt Signaling Device, choose the standard aluminum litt 50 Base Controller to mount it to surfaces like desks or place it on top of a litt Riser or a m!ka System Pole to lift it up. To do so, our included litt Universal Mounting Kit is all you need while all other tools become no longer necessary.
The litt Base Controller’s connection panel consists of an 8-pin terminal block with a handy Phoenix Low-Insertion Force Connector, and a mini-USB jack. All the connecting parts are located inside the litt Base Controller and litt Segments, making the entire device come in an extraordinarily clean and elegant look. litt's Base Controller is equipped with automatic litt Color Segment recognition, individual control inputs for each color (2.4-24VDC) and reverse polarity protection.
For more information on this or any other Yellowtec product, visit www.yellowtec.com.
|
|
|
|
|
|
|