![](/v/vspfiles/templates/Hype_Live-BU/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/Hype_Live-BU/images/clear1x1.gif) |
![](/v/vspfiles/templates/Hype_Live-BU/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/Hype_Live-BU/images/clear1x1.gif) |
The Torus Power Wall Mount 40 BAL AVR-2 ELITE is a versatile power conditioner that combines high-end performance with space-saving design. This wall-mounted unit features Automatic Voltage Regulation (AVR) and a balanced 240-volt power input (BAL), ensuring your audio and video equipment receive clean, consistent power, free from noise and voltage fluctuations. With its robust protection and ability to enhance sound and video quality, the Wall Mount 40 BAL AVR-2 ELITE is perfect for home theaters, recording studios, and high-end audio systems. Its sleek, wall-mounted design offers easy installation and integration into any setup, providing reliable power management without taking up valuable floor space.
Product Features:
- Chassis: Wall Mount
- Input: Range from 170 – 270 VAC Balanced
- Output: 120
- Input current limiting: 2 x 25 A (F)
- Output current: 40A
- Power VA: 4800
- Frequency: 60 Hz
- Output breakers: 2 X 20 A
- Surge suppression: SMSS
- Weight: 143 lb
Torus Power Wall Mount (WM) Models provide great flexibility for custom installations, and new construction. Dedicated lines can be run to install the power outlets where needed. Select the appropriate power level – ratings of 45A, 60A, and 100A are available (90 Amp for AVR / AVR2 models).
Choose the WM model with the features needed; AVR-2 ELITE models for use with the Torus Power Connect remote power management system, AVR2 models for individually controlled outlets, AVR models for basic monitoring, and RM models for straight power conditioning and protection.
WM units are designed for 240V input. Units can also be supplied with 208V inputs for 3-phase systems. WM units are provided with 20A output breakers. Alternatively, WM units can be supplied with terminal blocks to enable direct feed to subpanel.
AVR-2 added / enhanced Features
- Toroidal Isolation provides ultimate clean power performance
-
Voltage regulated to 120V (+/- 4V). For 220V-240V input models the regulation is +/- 8V.
-
Automatic shutdown of outlet power on low and high input fault conditions
-
Series mode surge suppression protects against lighting, surges, spikes etc.
-
Connect to local network using Web page browser
-
Password control Email notification of fault conditions
-
No programming or internet connection needed
-
Larger LCD display provides power data and fault condition details (configurable to turn off or dim on timed basis)
-
Remote power management using Torus Power Connect
-
All features of the AVR Series
-
Powerful 32-bit processor
-
Internal Flash Memory for 10,000 events to record data when offline to Torus Power Connect
-
New separate high reliability power supply module to further isolate the low voltage and high voltage paths
-
Enhanced communication module including WiFi connectivity (used for Torus Power Connect operation and transparent update of firmware)
-
Optical isolation between high voltage and low voltage to increase safety and compliance to new standards
-
New circuit boards designed for high resolution audio performance
-
USB port for 3rd party connectivity, LED lighting, and charging
-
Individually addressable outlet zones for control and monitoring
-
Power-up sequencing with selectable delay time between zones
-
Scheduling features allows automatic control (on/off) of any outlet zone. Schedule remains active when internet connection is lost, if system power maintained
-
Schedule up to 6 events per day per zone
-
Automatic reboot feature allows remote restart of routers and modems if internet connection lost
For more information on this or any other Torus Power product, visit www.toruspower.com.
|
|
![](/v/vspfiles/templates/Hype_Live-BU/images/clear1x1.gif) |
![](/v/vspfiles/templates/Hype_Live-BU/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/Hype_Live-BU/images/clear1x1.gif) |
![](/v/vspfiles/templates/Hype_Live-BU/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/Hype_Live-BU/images/clear1x1.gif)
|