 |
 |
 |
|
24" x 24" x 2" panels provide maximum absorptive surface
Easy to integrate 'cubic' shaped panel
Installs in minutes on practically any surface
Adapts well to most architectural designs
Surface, Off-Set, Corner, or Push-On mounting options
Edge - Square
Mounting Options
Primacoustic panels must be mounted with separate mounting hardware that you can add with the options included above. There are (4) options for mounting panels: (2) options for flush-mounting, (1) option for corner mounting, and (1) option for off-set mounting (meaning mounting the panels 3.5" off the wall for increased acoustical performance).
Option 1: Push-On Impalers are designed to provide the installer with a simple, quick and effective method of mounting Broadway glass wool panels onto walls without causing serious surface defacement. Primacoustic Push-On Impalers allow the installer to push the Broadway panel straight onto the Impaler clip, making it easier to align panels in clusters or side by side with accuracy.
The Push-On Impaler features a series of sharp protruding darts that penetrate the panel and secure it in place. To ensure panels do not get dislodged after installation, applying a dab of construction adhesive to the center of the Impaler during the mounting process adds a level of security and reduces opportunity for tampering. Impalers are installed using typical sheetrock anchors and screws.
- (4) impalers are typically used per 24" x 48" panel
- (4) impalers are typically used per 24" x 24" panel
- (2) impalers are typically used per 12" x 48" panel
Option 2: Surface Impalers are designed to provide the installer with a simple, quick, and effective method of mounting Broadway glass wool panels onto walls without causing serious surface defacement. Primacoustic Surface Impalers allow the installer to simply pull the panel down onto the Impaler clip quickly and efficiently, while allowing for some levelling adjustability after the panel is installed.
The Surface Impaler features four sharp darts that penetrate the panel and secure it in place. To ensure panels do not get dislodged after installation, applying a dab of construction adhesive to the center of the Impaler during the mounting process adds a level of security and reduces opportunity for tampering. Impalers are installed using typical sheetrock anchors and screws.
- (4) impalers are typically used per 24" x 48" panel
- (4) impalers are typically used per 24" x 24" panel
- (2) impalers are typically used per 12" x 48" panel
Option 3: Corner Impalers are designed to provide the installer with a simple, quick and effective method of mounting Broadway glass wool acoustic panels into corners to create bass traps. The Corner Impaler features a 45º angle design that positions a panel across a typical 90° corner without causing serious defacement of the wall surface.
The panel is held in place using a series of sharp protruding darts that penetrate the panel to secure it during installation. To ensure panels do not get dislodged after installation, a dab of construction adhesive may be applied to the impaler darts during the mounting process adding a higher level of security and reducing opportunity for tampering. Impalers are installed using typical sheetrock anchors and screws.
- (4) impalers are typically used per 24" x 48" panel
- (4) impalers are typically used per 24" x 24" panel
- (4) impalers are typically used per 12" x 48" panel
Option 4: Off-Set Impalers provide the installer with a simple, quick and effective method of mounting Broadway glass wool acoustic panels onto wall surfaces while creating an air cavity behind the panel to increase bass absorption.
The Offset Impaler features a U-shaped design that holds the panel from the wall surface by 3.5” making it easy to align with typical 2” x 4” studs. The panel is held in place using a series of sharp protruding darts that penetrate the panel to secure it during installation.
To ensure panels do not get dislodged after installation, applying a dab of construction adhesive to the impaler darts during the mounting process adds a level of security and reduces opportunity for tampering. Impalers are installed using typical sheetrock anchors and screws and therefore, will not cause serious surface defacement to the wall.
- (4) impalers are typically used per 24" x 48" panel
- (4) impalers are typically used per 24" x 24" panel
- (4) impalers are typically used per 12" x 48" panel
Broadway Control Cubes
Broadway Control Cubes are an eye catching, simple to install acoustic treatment solution designed to control primary reflections, eliminate flutter echo and reduce standing waves.
Control Cubes are built using high density six pound per cubic foot glass wool. These panels are typically spread or staggered across a wall surface to help manage reflections that interfere with the sound source. Primacoustic Control Cubes are particularly useful in creating aesthetically pleasing patterns and designs of panels across a wall or surface. Combining these with other Primacoustic panels can create a not only effective, but very attractive solution adding an artistic touch to your studio, entertainment or work space.
For more information on this or any Primacoustic product, visit www.primacoustic.com
|
|
|
 |
|
 |
|