 |
 |
 |
|
12" x 48" x 2" panels provide maximum absorptive surface
Roman Pillar' shape is ideal for spacing along walls
Easy-to-install on practically any surface
Surface, Off-Set, Corner, or Push-On mounting options
Adapts well to most architectural designs
Beveled edge panels provide a pleasing aesthetic
Mounting Options
Primacoustic panels must be mounted with separate mounting hardware that you can add with the options included above. There are (4) options for mounting panels: (2) options for flush-mounting, (1) option for corner mounting, and (1) option for off-set mounting (meaning mounting the panels 3.5" off the wall for increased acoustical performance).
Option 1: Push-On Impalers are designed to provide the installer with a simple, quick and effective method of mounting Broadway glass wool panels onto walls without causing serious surface defacement. Primacoustic Push-On Impalers allow the installer to push the Broadway panel straight onto the Impaler clip, making it easier to align panels in clusters or side by side with accuracy.
The Push-On Impaler features a series of sharp protruding darts that penetrate the panel and secure it in place. To ensure panels do not get dislodged after installation, applying a dab of construction adhesive to the center of the Impaler during the mounting process adds a level of security and reduces opportunity for tampering. Impalers are installed using typical sheetrock anchors and screws.
- (4) impalers are typically used per 24" x 48" panel
- (2) impalers are typically used per 12" x 48" panel
Option 2: Surface Impalers are designed to provide the installer with a simple, quick, and effective method of mounting Broadway glass wool panels onto walls without causing serious surface defacement. Primacoustic Surface Impalers allow the installer to simply pull the panel down onto the Impaler clip quickly and efficiently, while allowing for some levelling adjustability after the panel is installed.
The Surface Impaler features four sharp darts that penetrate the panel and secure it in place. To ensure panels do not get dislodged after installation, applying a dab of construction adhesive to the center of the Impaler during the mounting process adds a level of security and reduces opportunity for tampering. Impalers are installed using typical sheetrock anchors and screws.
- (4) impalers are typically used per 24" x 48" panel
- (2) impalers are typically used per 12" x 48" panel
Option 3: Corner Impalers are designed to provide the installer with a simple, quick and effective method of mounting Broadway glass wool acoustic panels into corners to create bass traps. The Corner Impaler features a 45º angle design that positions a panel across a typical 90° corner without causing serious defacement of the wall surface.
The panel is held in place using a series of sharp protruding darts that penetrate the panel to secure it during installation. To ensure panels do not get dislodged after installation, a dab of construction adhesive may be applied to the impaler darts during the mounting process adding a higher level of security and reducing opportunity for tampering. Impalers are installed using typical sheetrock anchors and screws.
- (4) impalers are typically used per 24" x 48" panel
- (4) impalers are typically used per 12" x 48" panel
Option 4: Off-Set Impalers provide the installer with a simple, quick and effective method of mounting Broadway glass wool acoustic panels onto wall surfaces while creating an air cavity behind the panel to increase bass absorption.
The Offset Impaler features a U-shaped design that holds the panel from the wall surface by 3.5” making it easy to align with typical 2” x 4” studs. The panel is held in place using a series of sharp protruding darts that penetrate the panel to secure it during installation.
To ensure panels do not get dislodged after installation, applying a dab of construction adhesive to the impaler darts during the mounting process adds a level of security and reduces opportunity for tampering. Impalers are installed using typical sheetrock anchors and screws and therefore, will not cause serious surface defacement to the wall.
- (4) impalers are typically used per 24" x 48" panel
- (4) impalers are typically used per 12" x 48" panel
Broadway Control Columns
Broadway Control Columns present an attractive, 'easy-to-install' solution for acoustic treatment where you want to control primary reflections, eliminate flutter echo and reduce standing waves.
Made from high density 6lb per cubic foot high density glass wool, Control Columns are designed to be arranged in a spaced array to treat bothersome first order reflections that interact with the sound source and the listener. The panels are typically spread across a wall surface leaving space in between each panel. This allows some of the energy to reflect back into the room so as not to completely deaden the space while maximising the panel's absorptive efficiency.
The Control Column's long narrow design is reminiscent of the historic 'Roman Pillar' making it an ideal compliment more demanding architectural designs. This makes the Control Columns an excellent choice for LEDE live-end / dead-end studio designs and home theatres. For those with creative flair, Control Columns can be combined with Primacoustic Accent panels to create an attractive solution for office spaces, board rooms, restaurants and lobbies that often need to be tamed in effort to reduce the reverberant field.
Broadway Control Columns come in a choice of 1", 2" and 3" thick panels with bevelled edges.
For more information on this or any Primacoustic product, visit www.primacoustic.com
|
|
|
 |
|
 |
|