 |
 |
 |
|
The KH 80 DSP two-way active bi-amplified monitor features a DSP engine with network control, a Mathematically Modeled Dispersion Waveguide (MMD), an analogue input and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 80 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible.
The KH 80 DSP is designed for use as a near-field monitor, as a front loudspeaker in small multi-channel systems, or as a rear loudspeaker in a compact multi-channel systems. It can be used in project and music studios, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering. It is also well suited for use in domestic environments.
Product Features:
- New in-house simulated drivers with metal grilles
- Neumann.Control App for iPads to setup, align, and operate the monitor
- Powerful alloy fabric tweeter dome
- Elliptical Mathematically Modeled Dispersion (MMD) waveguide, with wide horizontal and narrow vertical dispersion
- Long throw composite sandwich cone bass driver with Extremely Linear Force Factor (ELFF)
- Two-color + dimmable Neumann logo
- Compact polycarbonate composite cabinet
- Large front panel ports
- One-piece front panel with no discontinuities
- Powerful highly efficient amplifiers with large headroom
- Production consistency due to individual alignment in final test
- 4-Position low-mid acoustical control
- 8 x Precision Alignment acoustical controls accessible via control network
- Linear phase crossover, with bypass
- Wide range input gain and output level controls
- Control network used standard Ethernet components
- Completely symmetrical internal signal chain
- Double insulated electrical design
- Universal switched-mode power supply
- Extensive mounting hardware options
Mounting Options
Precision by Triad-Orbit Mounting Solution
Immersive Sound Speaker Mount System offers many options for mounting onto walls and ceilings with Triad-Orbit Technology. This uniquely designed patent-pending speaker mounting system allows the installer to meet the critical demands of Dolby Atmos and immersive sound installations providing unparalleled flexibility in mounting and alignment options, saving time in installation room tuning and laser alignments.
(1) SM-UM1 | Direct Mount:
The most affordable speaker mount. Its universal face plate works with many speakers under 25 pounds. With the ability to adjust pan and tilt and lock positioning with geared fittings, the SM-UM1 is perfect for Dolby Atmos rooms where lighter speakers are being used. 
(2) SM-UM1 + WM1 Wall Mount:
The WM1 is optional in the UM1 System, however, it’s highly recommended to improve your installation workflow.
If using the WM1, press it against the wall at your desired location and mark the mounting holes with a pencil. Then pre-drill into studs or place your anchors. Attach the WM1 to your wall.
If mounting the UM1 directly to the wall, place it in the desired location and mark the mounting holes. Pre-drill into studs or place anchors as with WM1, but mount it to the wall after connecting your speaker to the system.
IsoAcoustics Mounting Solutions
Featuring IsoAcoustics award winning isolation technology, V120 Mount is a studio monitor ceiling and wall mount that decouples studio monitors from wall and ceiling structures, mitigating structure borne vibrations from exciting the supporting surfaces.
The V120 isolation mount is adaptable to wall mount and ceiling structures and is designed to be compatible with many studio monitors weighing up to 40lbs (18.1kg).(1) V120 Mount + C-Bracket:
Improved Spatial Openness and Clarity for Wall & Ceiling Mounted Pro Audio Speakers. The C-Bracket will allow the studio monitors to be focused downwards, or tilted up to 45 upwards. If you need to tilt your studio monitors higher, then please use the L-Bracket instead of the C-Bracket. 
(2) V120 Mount + L-Bracket:
The L-Bracket will allow the studio monitor to be focused horizontally, or tilt up to 45 degrees downwards. The C-Bracket will allow the studio monitors to be focused downwards, or tilted up to 45 upwards. If you need to tilt your studio monitors lower, then please use the C-Bracket instead of the L-Bracket. 
.jpeg)
(3) ISO-Puck Mini (Pack of 8):
The ISO-Puck mini can isolate a speaker or monitor that is up to 18 lbs (8.2 kg) when using 3 units, or up to 24 lbs (10.9 kg) using 4 units. The low-profile design makes the ISO-PUCK series the ideal solution on meter bridges, on top of floor stands, consoles, desktops, millwork, or soffit mounted. The ISO-PUCK upper flange “suction cup” design adheres to the underside of the cabinet making the upper isolator live with the speaker, while the lower isolator anchors to the supporting surface. All the energy is managed within the core of the ISO-PUCK isolators. The IsoAcoustics patented isolation design provides improved stereo imaging. The isolators are biased to keep all energy in alignment with the listening position, resulting in greater clarity and focus.
(4) ISO-130 Speaker Stands (Pair):
The IsoAcoustics ISO-130 Stand is designed for small speakers and studio monitors. The ISO-130 isolation stands are the smallest stands within the ISO Stands family. The ISO-130 is 5.1-Inch (130mm) wide x 6-Inch (152mm) depth and is rated for monitors weighing up to 20lb (9 kg). Offering 14 variations of height and tilt, the ISO-130 will help you optimize the placement of your monitors and focus your tweeters to ear level. The IsoAcoustics patented isolation design provides greater clarity and improved stereo imaging.
Neumann.Control
Via standard IP networking, Neumann.Control gives full access to all the functions of the KH 80 DSP Studio Monitor not already available via the back panel. Systems of loudspeakers can be defined, from mono to 3D, aligned for a good in-room sound, and then operated centrally. Use the app in large setups too, compatible with up to 9 loudspeakers.
Key Features of Neumann.Control:
Setup:
- 1, 2, 4, 5, 7 and 9 loudspeakers
- Identify loudspeakers on the network that are in the room
- Assign the identified loudspeakers to positions in the room
Align:
- Guided Alignment – a set of simple questions resulting a well-balanced sound. The Guided Alignment is a process where you are asked very simple questions about the room and the loudspeaker position, and then the app adjusts the response of each loudspeaker accordingly
- Manual Alignment – an 8-band fully parameteric equaliser for expert users. In Manual Alignment expert users have complete freedom to adjust an 8-band parametric equalizer, levels and delays in each loudspeaker as they wish. Manual Alignment can also be used to edit Guided Alignments in a more detailed way.
Operate:
- System and alignment selection
- Volume control, preset levels, dim, mute all
- Groups, solos, mutes
- Other system settings such as delay, standby level and logo brightness
For more information on this or any Neumann product, visit www.neumann.com.
|
|
|
 |
|
 |
|