Mikodam Vata | Wall Panel | Box of 2 (White Lacquer)

The elegant waves of VATA panels from Mikodam create harmonious interiors. VATA is a customizable wall and ceiling panel offering flexible design options and acoustic solutions. It is an indoor architectural product with fast and safe assembly. It is the perfect solution to create sophisticated interiors with sustainable materials.

Combinations
Mikodam 3D wall panels present clever solutions to create your own spaces. Various combinations can be achieved with different color and material alternatives such as natural wood veneer (oak, walnut, teak), and lacquer (grey, white, anthracite). The material and the mass of the panel provide sound absorption. The geometry and the 3D design of the surfaces provide sound scattering. The forms Mikodam offers are shaped with acoustic calculations and aesthetic requirements in mind. The use of this product on walls and ceilings will allow even distribution of sound preventing acoustical defects such as acoustical glare, echo or flutter echo. The isolators located between the rails and the walls stop vibrations from spreading and prevent undesired resonances.

The height of the panel is 47". These panels can be assembled side-by-side or one on top of the other. Panels are mounted on to a rail system. The apparatus on the back can be turned to allow the panel to be rotated 90, 180, and 270 degrees. Through rotations, material choices, and using different lines together you can create different patterns and breath-taking interiors.

If needed 4" or 9.8" baseboards can be used with Mikodam walls on the top or bottom of the panels to complete the assembly on walls of different heights.

Material & Color options

• Natural Wood Veneer - Oak, Teak, Walnut
• Lacquer - Grey, White, Anthracite

Installation
The panels are mounted onto a rail system.

23.6 x 47.2" panels come with pre-inserted nuts at the corners on the back of the panel, ready to fix the Z-shaped profiles. Z-shaped profiles for 23.6 x 47.2" panels come separately. Using these pre-inserted nuts, Z-shaped profiles are fixed according to the direction of the panel to be hung.

The locations of the Z-shaped profiles are the same for all 23.6 x 47.2" panels so that if you change the panel with another 23.6 x 47.2" Mikodam panel you will not have to change the position of the U-shaped profile on the wall. You can also change the direction of the panels without changing the position of the U-shaped profiles.

While hanging the panels, for the panel at the bottom both lower and upper Z profiles should be used. For the panels above the first row, only Z profiles on the top are used.

Coatings

• World-class coating brands are used on all Mikodam walls & ceilings
• These coatings are acrylic and water-based
• Resistant to moisture and humidit
  
• Do not contain any toxic content, care for human health, and the environment
  
• In harmony with EU legislatio
  
• Quality and Reliability Management ISO 9001, Environmental Management System ISO 14001, Occupational Health and Safety 18001 certified
• Resistant to discoloration
• High physical and chemical resistance
• 4 times higher light resistance / High UV protection / FSC certified

Maintenance
Wipe with a damp cloth, do not use any chemicals or bleaching agents.