 |
 |
 |
|
Best performance of any multi-channel Pro Tools HD interface
Best cost per channel value of any Pro Tools HD interface solution
Connects directly to any Pro Tools HD system (Mac or PC)
Emulates Avid HD I/O interface, including sample-accurate delay compensation
Connect multiple units in a single system (1 unit per HD port)
Easy I/O calibration with front panel touchscreen
The Apogee Symphony I/O Mk II HD is designed for the Pro Tools HD user who needs a multi-channel audio interface with the best sound quality at an incredible cost per channel value. Whether using a Mac or PC based studio, Symphony I/O Mk II HD can connect directly to your Pro Tools HDX, Pro Tools HD Native or Pro Tools Core/Accel systems.
Symphony I/O Mk II HD can be utilized alongside or in place of Avid® or Digidesign interfaces for Pro Tools HD. In fact, each I/O module installed in Symphony I/O Mk II HD appears and functions in Pro Tools HD the same if it were a separate Avid HD I/O interface, so set up is easy and you can take advantage of important Pro Tools features such as sample-accurate delay compensation.
A single Symphony I/O Mk II HD unit can have up to 32 simultaneous analog I/O, so you can have more channels with less rack gear. Need even more channels? You can utilize multiple units simultaneously, with one Symphony I/O Mk II HD per every Pro Tools HD port in your system. Calibrating your I/O is easy with Symphony I/O Mk II HD’s front panel touchscreen.
If Pro Tools is part of your network environment, Symphony I/O Mk II’s Pro Tools | HD peripheral port lets you route audio between your Pro Tools session, the Dante network and Symphony I/O Mk II modules, no need for an additional, stand-alone box.
16X16 SE ANALOG I/O MODULE (TWO INCLUDED)
Apogee Symphony I/O Mk II 16×16 Special Edition offers the highest quality AD/DA conversion of the Symphony series. Offering the ultimate sonic performance for Dolby Atmos and other Immersive audio applications, 16×16 SE takes advantage of the latest advancements in digital and analog audio technology to offer A/D inputs with 124 dB (A) of dynamic range and a THD+N of -115 dB, plus D/A outputs with 128 dB (A) of dynamic range and an astonishingly low THD+N of -119 dB.
16 channels of I/O simultaneously (per card):
- Analog IN: 16 balanced inputs on 2 DSUB 25-pin connectors
-
Coax IN: S/PDIF on 1 RCA connector
-
Analog OUT: 16 balanced outputs on 2 DSUB 25-pin connectors
-
Coax OUT: Supports SPDIF on 1 RCA connector
For more information on this or any other Apogee Electronics product, visit www.apogeedigital.com.
|
|
|
 |
|
 |
|